dokucama

This is an old revision of the document!

---

NETAPP
To see the ontap netapp version, just type version

ifconfig -a
storage show disk  <--to show the disk and the filer that 'owns' them

LOGS (needs to be via gui or in cli privilege mode):

CLI (External Link):

---

STORAGE STUFF:

event log show -severity EMERGENCY   # 'syslog' events

CLUSTER/NODE HEALTH:

cluster show
cluster show -instance
storage failover show
cluster image show-update-progress \\

lif migration, pool exhaustion, locks:

# diagnostics
filer01::*> set d -c off;statistics show -object nfsv4_diag -instance nfs4_diag -counter storePool* -rawshow -object nfsv4_diag -instance nfs4_diag -counter storePool* -raw
filer01::*> set d -c off;statistics filer01::> volume show -vserver filer01-svm01 -volume homegrapeshot -fields policy

---

STORAGE STUFF:
CLI COMMANDS (cheat sheet) (We have heads, adapters and shelves)

SIS (single instance storage)

sis config  <-- show you the status of the settings.

VOLUMES

aggr show_space -h <-- check aggregate space
sysstat -m 1       <-- To see how busy the box is
volume show -vserver filer01-svm01 -volume homegrapeshot -fields policy

GENERAL DISK

disk show -v
vol status
storage show disk -p
options
sysconfig [-acr]
aggr status

NFS

vserver export-policy rule show   # under 'Client Match' column is the IPs os the servers mounted
exportfs
config dump -v config_file
system node service-processor show

LUN/iSCSI

lun show -m
aggr options myAggr snapshot_autodelete off <-- to disable the automatic snapshot deletion (USE WITH CARE)

Aggregate snapshot commands rdfile /var/log /etc/log(s) ←- To check the logs locally

rdfile /etc/messages <-- rdfile in genereal to show any OS file

diagnostics

filer01::*> set d -c off;statistics show -object nfsv4_diag -instance nfs4_diag -counter storePool* -rawshow -object nfsv4_diag -instance nfs4_diag -counter storePool* -raw
filer01::*> set d -c off;statistics filer01::> volume show -vserver filer01-svm01 -volume homegrapeshot -fields policy

---

NETWORK STUFF:

network interface show
network interface show -lif filer01-svm02_nfs_lif1 -instance     # to check specific lif status
network interface show -fields ? to customize the output.
show -fields vserver,address,status-admin
network port show
filer01::network port> show -fields node,port,mac,mtu,mtu-admin,speed-oper,ifgrp-port,broadcast-domain,link
network port ifgrp show    # for lacp ports

NETAPP SWITCHES:

(from filer): network device-discovery show -node filer01-04 -protocol cdp
show port-channel 3/1

SW UPGRADES:
External Link. Firmware is called FASTPATH, sometimes additional software called RCF is required

dir ! fto see the file system
show bootvar  ! to see the images availables in flash
show port all | include Up
show port-channel 3/1