dokucama

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

* Create interfaces in KVM > **VQFX-RE01** > They apper as emX ?
  * Rebooting the vcp also reboots the VFP
\\

The RE is used to connect to other network devices or hosts including the PFE. The initial port names are em0 to em14 but they are not used to communicate with other devices. The actual connectivity ports are xe-0/0/0 to xe-0/0/11. The port mappings of the RE are below:
  em0 - management interface (fxp0)
  em1 - internal link
  em2 - unusable
  em3 - xe-0/0/0
  em4 - xe-0/0/1
  em5 - xe-0/0/2
  em6 - xe-0/0/3
  em7 - xe-0/0/4
  em8 - xe-0/0/5
  em9 - xe-0/0/6
  em10 - xe-0/0/7
  em11 - xe-0/0/8
  em12 - xe-0/0/9
  em13 - xe-0/0/10
  em14 - xe-0/0/11

\\
  * [[https://forums.juniper.net/t5/Ethernet-Switching/vQFX10k-15-1X53-D60-on-ESXi-Installation-and-Running-with-up-to/td-p/303493]]
  * In the linux instances, interfaces are created but ifcfg files need to be written and network restarted
  * in the vqfx, reassign macs (manually).
    * xe-0/0/1 is the 1st one to be used.

----

INSTALLATION:\\
  * Preparations: [[https://panda314159.duckdns.org/doku.php?id=network_stuff:juniper:host-preparation|host preparation]]
    * Importamnt: lag interfaces don't work with virtio, therefore linux servers need to be e1000 <<<

show interface | display set   | no-more # delete all interfaces except xe-0/0/0-11
  commit
  set system scripts commit allow-transients
  set system scripts commit file set-em-mac-to-xe-ae-vQFX.slax
  commit

* Install: [[https://codingpackets.com/blog/juniper-vqfx-vagrant-libvirt-box-install]]
    * step by step guide {{ :network_stuff:step-by-step-vqfx.docx |}}
    * to configure the nodes (hosts and vqfx cli): {{ :network_stuff:nodes-config-example.docx |}}
  * Troubleshooting: {{ :network_stuff:juniper:troubleshooting-vqfx-vmx-install.docx |}}
\\
**FULL DIR CONTENTS: {{ :network_stuff:juniper:vqfx-vagrant-ansible.tar.gz |}} **

# this is the bootstrap script (all components in daughter pages here)
  #!/bin/bash
  vagrant up 
  ./genhost.sh
  ./push-slax.sh
  ansible-playbook --private-key=~/.vagrant.d/insecure_private_key -u vagrant -i ini/hosts -l VQFX playbook-housekeeping.yml
  ansible-playbook --private-key=~/.vagrant.d/insecure_private_key -u vagrant -i ini/hosts -l VQFX playbook-vqfx.yml

----

TODO: 
  - ansible to save all running configs in files

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International

dokucama

User Tools

Site Tools

Page Tools