Differences

This shows you the differences between two versions of the page.

--- network_stuff:netapp [2019/04/02 09:40] – jotasandoku
+++ network_stuff:netapp [2023/11/02 14:38] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-NETAPP
+NETAPP\\
-CLI ([[https://www.sysadmintutorials.com/tutorials/netapp/netapp-clustered-ontap/netapp-clustered-ontap-cli/|External Link]]):
+  version
+  storage show disk  <--to show the disk and the filer that 'owns' them
-NETWORK:
+  system controller show   # to see the FAS version
-  network interface show
-  network interface show -fields ? to customize the output.
-  show -fields vserver,address,status-admin
-  network port show
-  filer01::network port> show -fields node,port,mac,mtu,mtu-admin,speed-oper,ifgrp-port,broadcast-domain,link
-  network port ifgrp show    # for lacp ports
-\\
 ----
-STORAGE STUFF:\\
+CLUSTER/NODE HEALTH:
-NETAPP SWITCHES:\\
+**NFS**
-  (from filer): network device-discovery show -node filer01-04 -protocol cdp
+  vserver export-policy rule show   # under 'Client Match' column is the IPs os the servers mounted!!
-  show port-channel 3/1
+  exportfs
-\\
+  config dump -v config_file
-SW UPGRADES:\\
+  system node service-processor show
-[[https://library.netapp.com/ecm/ecm_download_file/ECMP12469252|External Link]]. Firmware is called FASTPATH, sometimes additional software called RCF is required \\
-  dir ! fto see the file system
-  show bootvar  ! to see the images availables in flash
-  show port all | include Up
-  show port-channel 3/1
-SYSLOG:
+(We have heads, adapters and shelves)
-> event log show -severity EMERGENCY
-\\
-CLUSTER/NODE HEALTH:
   cluster show
   cluster show -instance
   storage failover show
-  cluster image show-update-progress \\
+  cluster image show-update-progress
+  event log show -severity EMERGENCY   # 'syslog' events
-lif migration, pool exhaustion, locks:\\
+  lif migration, pool exhaustion, locks:\\
-  # diagnostics
+  Diagnostics:
   filer01::*> set d -c off;statistics show -object nfsv4_diag -instance nfs4_diag -counter storePool* -rawshow -object nfsv4_diag -instance nfs4_diag -counter storePool* -raw
-  filer01::*> set d -c off;statistics filer01::> volume show -vserver filer01-svm01 -volume homegrapeshot -fields policy
+  filer01::*> set d -c off;statistics filer01::> volume show -vserver filer01-svm01 -volume homemycompany1 -fields policy
-----
+SIS (single instance storage)
-STORAGE STUFF:\\
+  sis config  <-- show you the status of the settings.
-CLI COMMANDS (cheat sheet)
-(We have heads, adapters and shelves)
+VOLUMES
+  aggr show_space -h <-- check aggregate space
+  sysstat -m 1       <-- To see how busy the box is
+  volume show -vserver filer01-svm01 -volume homemycompany1 -fields policy
+GENERAL DISK
+  disk show -v
+  vol status
+  storage show disk -p
+  options
+  sysconfig [-acr]
+  aggr status
-SIS (single instance storage)
+LUN/iSCSI
->sis config  <-- show you the status of the settings.
+  lun show -m
+  aggr options myAggr snapshot_autodelete off <-- to disable the automatic snapshot deletion (USE WITH CARE)
+Aggregate snapshot commands
+ rdfile /var/log   /etc/log(s) <-- To check the logs locally
+  rdfile /etc/messages <-- rdfile in genereal to show any OS file
-VOLUMES
-> aggr show_space -h <-- check aggregate space
-> sysstat -m 1       <-- To see how busy the box is
-> volume show -vserver filer01-svm01 -volume homegrapeshot -fields policy
-GENERAL DISK
+----
-> disk show -v
-> vol status
-> storage show disk -p
-> options
-> sysconfig [-acr]
-> aggr status
-NFS
+CLUSTER UPGRADES (filer upgrades):\\
-> exportfs
+  * [[https://confluence.mycompany2datacloud.com/display/IN/Netapp+filer+firmware+update]]
-> config dump -v config_file
+  * {{ :network_stuff:netapp-filer-upgrades.pdf |}}
-> system node service-processor show
-LUN/iSCSI
+----
-> lun show -m
->> aggr options myAggr snapshot_autodelete off <-- to disable the automatic snapshot deletion (USE WITH CARE)
+**NETWORK STUFF:**\\
-Aggregate snapshot commands
-> rdfile /var/log   /etc/log(s) <-- To check the logs locally
+  network interface show
-> rdfile /etc/messages <-- rdfile in genereal to show any OS file
+  network interface show -lif filer01-svm02_nfs_lif1 -instance     # to check specific lif status
-# diagnostics
+  network interface show -fields ? to customize the output.
-filer01::*> set d -c off;statistics show -object nfsv4_diag -instance nfs4_diag -counter storePool* -rawshow -object nfsv4_diag -instance nfs4_diag -counter storePool* -raw
+  show -fields vserver,address,status-admin
-filer01::*> set d -c off;statistics filer01::> volume show -vserver filer01-svm01 -volume homegrapeshot -fields policy
+  network port show
+  filer01::network port> show -fields node,port,mac,mtu,mtu-admin,speed-oper,ifgrp-port,broadcast-domain,link
+  network port ifgrp show    # for lacp ports
+  node run -node filer01-03 -command ifconfig -v            # for troubleshooting lacp. see https://kb.netapp.com/app/answers/answer_view/a_id/1001343/~/faq%3A-troubleshooting-lacp-port-channel%2F-interface-groups-
+\\
+NETAPP SWITCHES:\\
+  (from filer): network device-discovery show -node filer01-04 -protocol cdp
+  show port-channel 3/1
+\\
+SW UPGRADES:\\
+[[https://library.netapp.com/ecm/ecm_download_file/ECMP12469252|External Link]]. Firmware is called FASTPATH, sometimes additional software called RCF is required \\
+  dir ! fto see the file system
+  show bootvar  ! to see the images availables in flash
+  show port all | include Up
+  show port-channel 3/1
+----
+TROUBLESHOOT OPEN CASES:\\
+  * To find the controller's serial number or model plus lots of info:
-> ifconfig -a
+  ::> system show -instance
-> storage show adapter  <--version and similar information

dokucama

User Tools

Site Tools

Differences

Page Tools