Differences

This shows you the differences between two versions of the page.

--- network_stuff:netapp [2019/03/29 11:54] – created jotasandoku
+++ network_stuff:netapp [2023/11/02 14:38] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-NETAPP
+NETAPP\\
+  version
+  storage show disk  <--to show the disk and the filer that 'owns' them
+  system controller show   # to see the FAS version
-CLI ([[https://www.sysadmintutorials.com/tutorials/netapp/netapp-clustered-ontap/netapp-clustered-ontap-cli/|External Link]]):
+----
+CLUSTER/NODE HEALTH:
+**NFS**
+  vserver export-policy rule show   # under 'Client Match' column is the IPs os the servers mounted!!
+  exportfs
+  config dump -v config_file
+  system node service-processor show
+(We have heads, adapters and shelves)
+  cluster show
+  cluster show -instance
+  storage failover show
+  cluster image show-update-progress
+  event log show -severity EMERGENCY   # 'syslog' events
+  lif migration, pool exhaustion, locks:\\
+  Diagnostics:
+  filer01::*> set d -c off;statistics show -object nfsv4_diag -instance nfs4_diag -counter storePool* -rawshow -object nfsv4_diag -instance nfs4_diag -counter storePool* -raw
+  filer01::*> set d -c off;statistics filer01::> volume show -vserver filer01-svm01 -volume homemycompany1 -fields policy
+SIS (single instance storage)
+  sis config  <-- show you the status of the settings.
+VOLUMES
+  aggr show_space -h <-- check aggregate space
+  sysstat -m 1       <-- To see how busy the box is
+  volume show -vserver filer01-svm01 -volume homemycompany1 -fields policy
+GENERAL DISK
+  disk show -v
+  vol status
+  storage show disk -p
+  options
+  sysconfig [-acr]
+  aggr status
+LUN/iSCSI
+  lun show -m
+  aggr options myAggr snapshot_autodelete off <-- to disable the automatic snapshot deletion (USE WITH CARE)
+Aggregate snapshot commands
+ rdfile /var/log   /etc/log(s) <-- To check the logs locally
+  rdfile /etc/messages <-- rdfile in genereal to show any OS file
+----
+CLUSTER UPGRADES (filer upgrades):\\
+  * [[https://confluence.mycompany2datacloud.com/display/IN/Netapp+filer+firmware+update]]
+  * {{ :network_stuff:netapp-filer-upgrades.pdf |}}
+----
+**NETWORK STUFF:**\\
-NETWORK:
   network interface show
+  network interface show -lif filer01-svm02_nfs_lif1 -instance     # to check specific lif status
   network interface show -fields ? to customize the output.
   show -fields vserver,address,status-admin
@@ Line 10: / Line 73: @@
   filer01::network port> show -fields node,port,mac,mtu,mtu-admin,speed-oper,ifgrp-port,broadcast-domain,link
   network port ifgrp show    # for lacp ports
+  node run -node filer01-03 -command ifconfig -v            # for troubleshooting lacp. see https://kb.netapp.com/app/answers/answer_view/a_id/1001343/~/faq%3A-troubleshooting-lacp-port-channel%2F-interface-groups-
 \\
 NETAPP SWITCHES:\\
   (from filer): network device-discovery show -node filer01-04 -protocol cdp
+  show port-channel 3/1
 \\
 SW UPGRADES:\\
@@ Line 18: / Line 85: @@
   dir ! fto see the file system
   show bootvar  ! to see the images availables in flash
-  hints in : cisco_upgrade_procedure
+  show port all | include Up
+  show port-channel 3/1
+----
+TROUBLESHOOT OPEN CASES:\\
+  * To find the controller's serial number or model plus lots of info:
-SYSLOG:
+  ::> system show -instance
-> event log show -severity EMERGENCY
-CLUSTER/NODE HEALTH:
-> cluster show
-> cluster show -instance
-> storage failover show
-> cluster image show-update-progress
-lif migration, pool exhaustion, locks
-# diagnostics
-filer01::*> set d -c off;statistics show -object nfsv4_diag -instance nfs4_diag -counter storePool* -rawshow -object nfsv4_diag -instance nfs4_diag -counter storePool* -raw
-filer01::*> set d -c off;statistics filer01::> volume show -vserver filer01-svm01 -volume homegrapeshot -fields policy

dokucama

User Tools

Site Tools

Differences

Page Tools