Differences

This shows you the differences between two versions of the page.

--- network_stuff:juniper:vmx [2019/10/11 14:08] – jotasandoku
+++ network_stuff:juniper:vmx [2023/11/02 14:38] (current) – external edit 127.0.0.1
@@ Line 7: / Line 7: @@
 INSTALLATION:\\
-  * Preaparations: {{ :network_stuff:juniper:host-preparation.docx |}}
+  * [[https://panda314159.duckdns.org/doku.php?id=network_stuff:juniper:host-preparation|host preparation]]
-  * Install: {{ :network_stuff:step-by-step-vmx.docx |}}
+  * Install:  [[https://panda314159.duckdns.org/doku.php?id=network_stuff:juniper:vmx:step-by-step|step-by-step-guide]]
     * based on : [[https://codingpackets.com/blog/juniper-vmx-vagrant-libvirt-box-install]]
   * Troubleshooting: {{ :network_stuff:juniper:troubleshooting-vqfx-vmx-install.docx |}}
+  * Provision vagrant file with ansible : see this file tree (note we do **1 vagrant up & then 2 run.ansible.sh**) : {{ :network_stuff:juniper:root_vmx-test.tar.gz |}}
+    * [[https://www.linkedin.com/pulse/network-automation-using-ansibleplaybookspart-4-ahnaf-shahriar/]]
+    * [[https://github.com/JNPRAutomate/ansible-junos-examples]]
+  # vagrant up
+  # genhost.sh file
+  #!/bin/bash
+  vagrant ssh-config > ssh-config
+  echo -e "
+  [VMX]
+  R1-vcp ansible_host=`egrep -A 1 "Host R1-vcp" ssh-config | egrep HostName | cut -d' ' -f 4`
+  R2-vcp ansible_host=`egrep -A 1 "Host R2-vcp" ssh-config | egrep HostName | cut -d' ' -f 4`
+  R3-vcp ansible_host=`egrep -A 1 "Host R3-vcp" ssh-config | egrep HostName | cut -d' ' -f 4`
+  R4-vcp ansible_host=`egrep -A 1 "Host R4-vcp" ssh-config | egrep HostName | cut -d' ' -f 4`
+  R5-vcp ansible_host=`egrep -A 1 "Host R5-vcp" ssh-config | egrep HostName | cut -d' ' -f 4`
+  R6-vcp ansible_host=`egrep -A 1 "Host R6-vcp" ssh-config | egrep HostName | cut -d' ' -f 4`
+  R7-vcp ansible_host=`egrep -A 1 "Host R7-vcp" ssh-config | egrep HostName | cut -d' ' -f 4`
+  P1-vcp ansible_host=`egrep -A 1 "Host P1-vcp" ssh-config | egrep HostName | cut -d' ' -f 4`
+  DC1-vcp ansible_host=`egrep -A 1 "Host DC1-vcp" ssh-config | egrep HostName | cut -d' ' -f 4`
+  [CSR]
+  C1 ansible_host=`egrep -A 1 "Host C1" ssh-config | egrep HostName | cut -d' ' -f 4`
+  C2 ansible_host=`egrep -A 1 "Host C2" ssh-config | egrep HostName | cut -d' ' -f 4`
+  T1 ansible_host=`egrep -A 1 "Host T1" ssh-config | egrep HostName | cut -d' ' -f 4`
+  " > ini/hosts
+  #Then run ansible
+  ansible-playbook --private-key=~/.vagrant.d/insecure_private_key -u vagrant -i ini/hosts -l VMX playbook-vmx.yml
+  ansible-playbook --private-key=~/.vagrant.d/insecure_private_key -u vagrant -i ini/hosts -l CSR playbook-csr.yml
+----
+KEY POINTS:
+  * If we use the same instance of vmx multiple times, irb macs with be the same and communication won't happen unless we do things like this:
+  set interfaces irb unit 400 mac 00:05:86:ce:b0:03
+----
+TODO:\\
+  * Review project documentation
+  * libvirtd assigns the fxp address via dhcp but also gives a default route (ie 0/0 via fxp). we need to fix this
+    * option1: play with dhcp kvm settings so it doesn't give a def route
+    * option2: automate this: 1. grab ip in fxp0 2. remove dhcp config from fxp0 3. add static route (see below).
+    * option3: do it manually:
+  [edit interfaces fxp0 unit 0 family inet]
+  -       dhcp;
+  [edit interfaces fxp0 unit 0 family inet]
+  +       address 192.168.121.87/24;
+  [edit routing-options static]
+       route 10.8.40.0/23 { ... }
+  +    route 192.0.0.0/8 next-hop 192.168.121.1;

dokucama

User Tools

Site Tools

Differences

Page Tools