User Tools

Site Tools


network_stuff:juniper:srx

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
network_stuff:juniper:srx [2017/09/28 17:38] jotasandokunetwork_stuff:juniper:srx [2023/11/02 14:38] (current) – external edit 127.0.0.1
Line 92: Line 92:
     * vlans?     * vlans?
     * irb export term (called iBGP-export in the slingshots)     * irb export term (called iBGP-export in the slingshots)
 +
 +Note that in packet mode, no security policies are allowed, no point on defining zones either.. [[http://forums.juniper.net/t5/Routing/J-6350-MPLS-Support/m-p/17775|External Link]]
 +
 +
 +If we are in flow mode, To allow communication:\\
 +Put all interfaces in the same zone:
 +
 +  set security zones security-zone trust interface ge-0/0/2.0
 +  set security zones security-zone trust interface ge-0/0/3.0
 +
 +Create a policy to permit intra-zone traffic.
 +
 +  set security policies from-zone trust to-zone trust policy trust-to-trust match source-address any destination address any application any
 +  set security policies from-zone trust to-zone trust policy trust-to-trust then permit
 +
 +
 +----
 +
 +**SRX DIRECTORIES**\\
 +  * /junos : This is a read-only dir created in runtime by malloc. Expected to be 100%. See [[https://kb.juniper.net/InfoCenter/index?page=content&id=KB27198 |Link]] 
  
network_stuff/juniper/srx.1506620339.txt.gz · Last modified: (external edit)